Hello Here is the first practical lesson – drawing a skeleton of a cube. In this article I will discuss all the secrets you need to know when drawing this geometry. If you do not know how to frame looks like a cube, then look at the title picture of the article (it is above), you now need to recreate something like that, so we'll figure this rubbings on paper, the main thing that all sides were equal (the cube all the same paint). So Prepare a pencil, paper, eraser, pencil sharpener, and we begin to draw. Mentally take a picture of your cube and drag an imaginary picture in your sheet of paper to correctly position the figure on the worksheet. Now hold parallel line to the bottom of the sheet through the current, which will be based on the angle of the base frame of the cube. Draw perpendicular line – this will be a vertical frame edge of the cube. Draw a line just above the expected length vertical fin shape – it will continue to guide us.
Heed this step because we will draw the base of the cube. In the previous step we've got something like an inverted letter "T" nedorisovanny or cross, so here's take 2 pencil and crossed, please send them to the volume of a cube frame, and the intersection point pens move to the point of intersection of the vertical fin and horizontal edges of the two – it will help most accurately figure angles obredelit that need to be drawn on a sheet of paper. Now we need to determine the height of the vertical face shape, noting that the height of the dot. The schedule is such a term, it is called "perspective". This The term means that when drawing faces are different sizes than on the side or point the figures are, the more they are smaller in size, the closer – so, accordingly, more, even if we draw a cube. (Example: you look at the the road – next to you, it seems wide, but if you look into the distance, it seemed to be crossed). It turns out that in the long run parallel sides overlap. Based on the foregoing conduct of the distinguished point of two lines that intersect at a certain distance from the base – the point of intersection is called the vanishing point.
The most interesting thing is that these vanishing points, in this case, should form the parallel lines drawn in the first stage. Now measure the distance from the vertical edges to vertical edges, and noting the distance the currents draw the line at the vanishing point. And an important point, the greater the angle horizontal line and edges of the base, the less it will seem long edges of the base. Now Doris all vertical edges, as long as it were perpendicular to the horizontal line. Remember I said that more than line so it is smaller, and so it must be considered, as shown next to our side will be larger than their parallel sides. Doris and all the parties can compare the result with mine. ) To compare its result from the bulk figure I can advise this option, take a glass and summing it to the frame of a cube, using ink or felt-tip pen srisuyte it, and then put the picture on your page and you'll find all the errors (if Of course they are).